Floating Submersible Jet Aerator

Product Description

The FQSB Type Floating Submersible Jet Aerator is modified based on the submersible mixer, with additional stainless steel floating buoys. The specific model selection shall be implemented in accordance with the QSB Type Self-Priming Submersible Jet Aerator.

This equipment can be used as an aeration device in the biological pretreatment of water supply and the biological sewage treatment process. It performs oxygenation and mixing on the water-sludge mixture in the aeration tanks and aeration grit chambers of water treatment plants.

This aerator consists of a submersible pump and a jet pump, enabling water agitation and oxygenation to be carried out simultaneously. It not only achieves a high oxygen absorption rate but also has the advantage of a non-clogging impeller. The powerful unidirectional liquid flow creates effective convective circulation, and the motor load varies slightly with changes in water level, making installation simple. Compared with surface aerators, it can increase the oxygen transfer rate. Due to the fast flow velocity at the bottom edge, it can effectively prevent sludge sedimentation in a wide range; there is no foam splashing and the noise is low, avoiding secondary pollution.

1. The temperature of the medium shall not exceed 40°C;

2.The pH value of the medium ranges from 5 to 9;

3. The density of the medium shall not exceed 1150 kg/m³.

When assistance with model selection is required from our company, the user shall provide relevant data such as tank type, medium characteristics, required air intake capacity, and submersion depth. This enables our company to design and provide suitable equipment, so as to better meet the user's requirements.