Floating Fountain Aerator

Fountain aerators are suitable for golf courses, ecological landscape lakes, rivers, ponds and private garden ecological pools and ornamental fish ponds. Through re-oxygenation and water circulation, water quality is purified and maintained; in addition, when the body is operating, it will drive water circulation. To supply the oxygen needed for the growth of animals and plants at the bottom of ecological rivers and lakes, and to improve and reduce sediment.

The water body convection form of the fountain aerator makes the surface water body exchange with the bottom water body in the process of making vertical circulation flow, and fresh oxygen is input to the bottom of the lake, forming an oxygen-rich water layer at the bottom of the lake, digesting and decomposing the pollutants deposited at the bottom, and the waste gas is entrained After escaping from the water, the low-temperature water at the bottom is transported to the surface layer to adjust the surface water temperature, inhibit the reproduction and growth of algae on the surface of the water body, improve the micro-ecological environment, strengthen the self-purification ability of the water body, and improve the water quality in the short term.

Small size, light weight, can be operated by one person;

1. Promote the up and down circulation of the water body, improve the fluidity of the water body, and reduce the dead angle of the water body;

2. The vertical circulation flow can quickly exchange the upper and lower water bodies and increase the dissolved oxygen in the bottom layer;

3. Enhance the activity and reproduction capacity of microorganisms in the sediment, and accelerate the decomposition of pollutants;

4. Quickly remove sulfide, methane and ammonia produced by sediment, and reduce water odor;

5. Eliminate the natural thermocline in the water body and reduce the temperature difference between the upper and lower layers of the water body;

6. The spray pattern forms a wave-making effect, which helps to break up the algae and inhibit the breeding of mosquitoes.

Before selecting the LJ-FTA fountain aerator, the oxygen demand of the water body, the plane size of the water body and the depth structure must first be determined.

Small size, light weight, can be operated by one person;

The equipment is compact in structure, easy to install and easy to maintain;

Rapid oxygenation, compared with the traditional impeller aerator, the oxygenation effect is better;

Select anti-corrosion materials, suitable for both fresh water and sea water; High performance, low loss, with the advantages of energy saving and low consumption; Floating installation, no need for installation foundation, can be easily installed in water bodies under construction or built.

 

Fountain aerators are suitable for golf courses, ecological landscape lakes, rivers, ponds and private garden ecological pools and ornamental fish ponds. Through re-oxygenation and water circulation, water quality is purified and maintained; in addition, when the body is operating, it will drive water circulation. To supply the oxygen needed for the growth of animals and plants at the bottom of ecological rivers and lakes, and to improve and reduce sediment.

LJ-FTA series fountain aerators are one of the types of water-raising fountain aerators. There are two types of aerators, which are suitable for various types of water bodies, and play the role of aeration, oxygenation and circulation of water bodies.

Installing aeration or fountain equipment in deep water ponds can be difficult, however with a floating fountain aerator, you will find the entire process a breeze and the equipment is not affected by changes in water levels after installation.

1. Please ask a professional electrician for power installation;

2. The depth of the water body shall not be less than 0.6 meters.

A fixed way:

Adopt plug-in installation - no other accessories except equipment and rods on the surface of water body

Anchored installation - no visible accessories except for equipment on the surface of the water body

Precautions:

1. The power cord should be a removable rubber sheathed waterproof cable, one of which is reliably grounded to the motor casing.

2. The installation depth should be strictly controlled according to the technical parameter table, and the working depth cannot be adjusted arbitrarily.

3. Observe whether the motor is running in the correct direction within a few seconds after starting the machine, and adjust it in time if it is reversed.

4. There should be no metal wires, ropes, plastic bags and other fibrous debris in the water body in which the equipment operates, so as to avoid entanglement of the impeller and blockage of the water inlet and other parts.

5. The equipment is shipped from the factory and can be equipped with a distributor control system. When the control system automatically cuts off the power supply, it is necessary to find out the reason in time, and then start after troubleshooting.